Tips How to Build a Black Powder Gun
Open the case or kit and use the accessories seen inside to get the stock parts. Check against the list if the contents are complete. Have it replaced immediately if one is missing. Every accessory is there for an important purpose. You cannot improvise for something lacking.
Fit the plate to the bottom of the gun. Use the rasp and sand paper to work down the elevated spots in roughed-out gunstocks and repeatedly fit the bottom of the plate to the gun while checking if what you are doing is correct. Screw it firmly together if you are already sure of the positioning.
Fit the lock to stock to the next one. Slide the lock in the proper places on the right side of the gun for it to fit properly. The lock must slide all the way against the slide of the gunstock. Sand down those areas that block the entry of the stock. Do the same with the stocks.
Mount the trigger and slide its assembly up into the stock and screw it down tight. The gun must now be assembled, however you will now want to disassemble it and stain the stock with your choice of color and type of stain. Make the barrel blue by using the step-by-step blue gun kit provided. Rebuild the gun and distinguish how it shoots.
Smokeless Powder OTHER RELATED INFORMATION
